Installing on a Mac running El Capitan

Hello,
I need to install Contao on a Mac!
I have inherited a website that was developed with Contao on a pc! I have the username and password the developer used to go give access to edit via Contao. So as a start I have copied the site to the “Sites” folder on the Mac and have set up Apache2, php and MySQL all running fine!

Now I need to install Contao! I have tried to follow the “Installing Contao” Manual by following “Installing with Composer” but get lost after entering the following into Terminal on the Mac.

Nicks-iMac-2:~ nickair$ curl -sS https://getcomposer.org/installer | php
All settings correct for using Composer
Downloading 1.2.1...

Composer successfully installed to: /Users/nickair/composer.phar
Use it: php composer.phar
Nicks-iMac-2:~ nickair$ sudo mv composer.phar /usr/local/bin/composer
Password:
Nicks-iMac-2:~ nickair$

Is the next step to enter?
php composer.phar create-project contao/standard-edition <target>

“You have to replace the <target> parameter with a path to a folder where the Contao files will be created. If the target folder does not exist, it will be created automatically.

Can someone please point me to a guide that will help me to complete the installation or help with some guidance? Many thanks for any assistance!
Nick.

Contao 4 is still under development and currently more or less only for advanced users. If you are not that experienced, may be you should stick with the current LTS version, i.e. Contao 3.5.

Thanks for the tip Spooky, I am not experienced so will follow your advice. Is there a link on how to install this version on a Mac anywhere?
Thanks for your kind reply.
Nick

The installation process is not really OS specific. Here is the link to the 3.5 manual: https://docs.contao.org/books/manual...ng-contao.html

Thanks Spooky - A great help. Sorry to bother you with dumb questions!
I have downloaded Contao 3.5, unzipped it and have moved the folder into the Sites folder (localhost) alongside phpmyadmin and the website I need to edit
Next I have entered into Terminal curl -L http://download.contao.org/lts | tar -xzp
LTS version of Contao (3.5):
All good so far

following the Install guide and where it says: -

To open the Contao install tool, simply add /contao/install.php to the URL of your Contao installation.
The dumb question is ... what does this mean? Is the URL of the installation the folder I have downloaded?
Thanks for bearing with me Spooky.
Nick.

Quote:

---

Originally Posted by Nick

Thanks Spooky - A great help. Sorry to bother you with dumb questions!
I have downloaded Contao 3.5, unzipped it and have moved the folder into the Sites folder (localhost) alongside phpmyadmin and the website I need to edit
Next I have entered into Terminal curl -L http://download.contao.org/lts | tar -xzp
LTS version of Contao (3.5):
All good so far

---

I think you misunderstood something there ;). You didn't need to enter the command into the terminal, because that simply downloads Contao - which you already did.

Quote:

---

Originally Posted by Nick

To open the Contao install tool, simply add /contao/install.php to the URL of your Contao installation.
The dumb question is ... what does this mean? Is the URL of the installation the folder I have downloaded?
Thanks for bearing with me Spooky.
Nick.

---

For example http://localhost/your-contao-folder/contao/install.php

Again thanks for your patience!
And thanks for the advice re (For example http://localhost/your-contao-folder/contao/install.php)
In the browser if I enter http://localhost/nickair/contao/install.php I get The requested URL /nickair/contao/install.php was not found on this server.
I can get to my localhost via: -
http://localhost/~nickair/
Attached is a screen grab of my localhost!
Attachment 131

So next dumb question is what am I doing wrong!

Thanks Spooky I owe you a pint!

I am guessing you installed Contao into …/~nickair/contao? Then the URL is http://localhost/~nickair/contao/contao/install.php of course.

Spooky! Great and understood!
http://localhost/~nickair/contao/contao/install.php
Gets me to the Contao back end log in.... woopee! But...

At the top it says: -
Modify files via FTP
Your server does not support file access via PHP; most likely PHP runs as Apache module under a different user. Therefore please enter your FTP login details, so Contao can modify files via FTP (Safe Mode Hack).

Next dumb questions (and thanks for your kind help Spooky!)
On this first page (see screen grab) There is a place to enter the FTP hostname ! Is this the Online host FTP where the site resides or the local? If local
And a place to enter the relative patch to the Contao directory which I presume is: - localhost/~nickair/contao/contao/ Is that right Spooky?
Do I bother with the secure connection check box?
What port should it be set to?

Sorry to bother you with more questions! You have been very helpful...
Nick
Attachment 132

You either need to modify the rights of your folders or change the user under which the web server is running. You need to make sure, that the user under which the web server is running has sufficient access rights to all the files and folders in ~nickair/contao.

Thanks Spooky,
When I set up phpMyAdmin in terminal I set the permissions and user access rights, so I assume that the access to ~nickair/contao should be good! The user name and password are correct, just not clear on -
The FTP host name, should it be "localhost" ? As this is a local set up! (I was planning on using Navicat for uploading to the webserver!

That 2 pints I owe you!

Hi Spooky,
Sorry to be a pest but just an update! I am going to double check permissions with CHMOD in Terminal on the Contao folder!
Not done anything yet, just had lunch!
More later if there is disaster or not!

Thanks again,
Nick

Quote:

---

Originally Posted by Nick

When I set up phpMyAdmin in terminal I set the permissions and user access rights, so I assume that the access to ~nickair/contao should be good!

---

No, that has nothing to do with this issue. phpMyAdmin is for administrating the MySQL users and databases etc.

This issue is about file and folder rights.

Quote:

---

Originally Posted by Nick

The user name and password are correct, just not clear on -
The FTP host name, should it be "localhost" ? As this is a local set up! (I was planning on using Navicat for uploading to the webserver!

---

No, you are misunderstanding. You need to assign the correct file and folder permissions and ownerships to your Contao installation. The PHP process of your webserver must have sufficient access rights for the Contao installation.

Do not use the so called "Safe Mode Hack". Contao prompts you to enter FTP credentials because of insufficient file access rights to the Contao installation and thus it offers you to use the "Safe Mode Hack" - which circumvents the issue by using an FTP server instead for any file and folder operations. But this is not what you should use. You should assign the correct permissions and ownership to the files and folders of the Contao installation.

If you are not sure what to do, you could always just use

Code:

---

chmod -R 777 ./*

---

, since it's just your localhost... but you should never do that in a productive environment!

Hey Spooky you are a star!
That has worked! Set permissions as suggested and reloaded the contao page and it took me to password set up!
Brilliant! Sorry for being a numpty!

Next and hopefully the last issue! is the next page that has popped up!
Is the check database connection window! I presume that now I log into phpMyAdmin and set up a database for the website I need to edit in contao and I call it deardens.ltd.uk as that is the site name. Or does this existing contao web site have one I need to import!?

Hopefully nearly there and last dumbo question - would have been impossible without your help...
Thanks
Nick

Yes you need to create a database in phpMyAdmin. The name of the database does not matter, just use "deardens" for example. Then enter the database information (name and credentials) in the Install Tool. After that, Contao will proceed to create all necessary tables.

Spooky,
Thank you so much for all your help last week with the install of Contao on the Mac.
I finished it off this morning and its up and running!

Next I have to find the way to open/import an existing contao website.. I will have a good look on Youtube - The Manual and the web to see if its explained.
In the meantime Spooky thanks.
Nick.

Quote:

---

Originally Posted by Nick

Next I have to find the way to open/import an existing contao website..

---

Do you mean like a Template?

You could install the Contao Online Demo: https://contao.org/en/extension-list...l_demo.en.html (search for "official_demo" in your Extension Repository).

Hi Spooky, Thanks for getting back to me, very kind of you!

Not really a template! I have a full website that was developed using Contao and now need to edit it in Contao, then get it uploaded with the changes!
I have downloaded all the files (called deardens.ltd.uk) for this site via an ftp link and the folder is now sat in my "Sites" folder.
See screen grab for the path!

I presume what I do is ... set up a data base for this site in phpMyAdmin! Then import the appropriate database??
I have found a file in the deardens.ltd.uk folder called system and in there there is a backup folder and in there is a file called mysql-2.9.5.sql (see path).
I am guessing that this is the main database file.... or is it!! If it is then once imported to phpMyAdmin I will need to run the install tool in contao again..??
Is this all correct so far Spooky or am I barking up the wrong tree. Not done anything yet as been searching the web and forums for answers but they are thin on the ground!

Thanks for any help Spooky,
Nick.
Attachment 133

Ok, first of all, this seems to be an old Contao 2 installation, judging from the name of the SQL file it's probably Contao 2.9.5. If you want to update that installation, you can do the following:

1. Drop all tables from your current local database (which you created before).
2. Import mysql-2.9.5.sql via phpMyAdmin to your local database.
3. Run the Contao Install Tool again and execute all necessary upgrade procedures.
4. After that you can start re-integrating all necessary extensions and files into the new Contao installation.
5. You will have to rename the /files folder to /tl_files

All this might not be an easy task though.

Thanks Spooky,
OK a bit Tricky, but I think I can work my way through this. You have given me a clear route!

1. Drop all tables from your current local database (which you created before).
2. Import mysql-2.9.5.sql via phpMyAdmin to your local database.
3. Run the Contao Install Tool again and execute all necessary upgrade procedures.
4. After that you can start re-integrating all necessary extensions and files into the new Contao installation.
5. You will have to rename the /files folder to /tl_files

If I get stuck I hopefully you will be able to to dig me out! But I will deal with 1 first!
2! I presume I have to find this version and download it!? and then import it?
3. OK
4. Sounds OK but lets see!
5. As 5!

Again Spooky Thanks.... Working on 1 and 2 now.....
Nick

Quote:

---

Originally Posted by Nick

2! I presume I have to find this version and download it!? and then import it?

---

No, I was talking about the MySQL dump you mentioned ;).

OK understood, and that makes sense!
Thanks! On with it now. Will let you know how it progresses. Thanks Spooky,
Nick

Ok Spooky,
1. Dropped all tables.
2. Trying to import data - mysql-2.9.5.sql via phpMyAdmin but the 5.5Mb file is too big, I get the following message: -

No data was received to import. Either no file name was submitted, or the file size exceeded the maximum size permitted by your PHP configuration.

I presume that I need to increase the limit via terminal, just had a quck check and I do not have a .ini file in myphpadmin folder!
Do I create one? or is it a mod to a ,php file?

Thanks Spooky

No, the limit is configured in your php.ini
You need to find the php.ini of your web server and do the following for example: http://stackoverflow.com/a/2184541/374996 (set it so 128M or something bigger though)

Nicks-iMac-2:~ nickair$ locate php.ini

WARNING: The locate database (/var/db/locate.database) does not exist.
To create the database, run the following command:

Again thanks for your patience Spooky.
I do not seem to have a .ini file! I searched via Terminal and got as follows..

Nicks-iMac-2:~ nickair$ locate php.ini

WARNING: The locate database (/var/db/locate.database) does not exist.
To create the database, run the following command:

sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.locate.plist

Please be aware that the database can take some time to generate; once
the database has been created, this message will no longer appear.

So do I create one?

Read those error messages again, "locate" does not seem to work.
You can find your php.ini via the phpinfo(); for example. Does your web server has a general info page? What web server are you using anyway?

Hi Spooky and thanks,

I searched all over and could noyt find the .ini file so I copied php.ini.default:with ...
sudo cp /etc/php.ini.default /etc/php.ini
I logged into my local host via terminal with Nicks-iMac-2:~ nickair$ ssh localhost

Once logged in I found it with: -
php -i | grep 'Configuration File'
It was here -
Configuration File (php.ini) Path => /etc

Then to open and edit it
Nicks-iMac-2:etc nickair$ pico php.ini

Found the parts upload_max_filesize = 2M and changed it to 120M and hit ctl O and I do not have permission to save the changes! Dammit.
Need to set the permissions...
So backed out and now I guess its a chmod u+w/etc but I need to check that!!!
Is that correct Spooky?
Getting there but you were right about it not being that easy!
Nick.

Hi Spooky,
Trying to 1. set permissions on the .ini file to I can up the max file size! But having issues with getting permissions changed so far I have tried...

Nicks-iMac-2:etc nickair$ cd /etc
Nicks-iMac-2:etc nickair$ sudo chown nickair/ect/php.ini
usage: chown [-fhv] [-R [-H | -L | -P]] owner[:group] file ...
chown [-fhv] [-R [-H | -L | -P]] :group file ...
Nicks-iMac-2:etc nickair$ chmod 644 /etc/php.ini
chmod: Unable to change file mode on /etc/php.ini: Operation not permitted

Also the location of this file seems odd as /etc !!!!

Bum!

You could also try to zip (compress) your SQL dump "mysql-2.9.5.sql" and reimport the zipped file with phpMyAdmin.

Many thanks for your help, I am having a "proper bother" with editing the php.ini file, I can get at it, changed the file size and the time zone but on command O - enter - I get Error writing php.ini: Permission denied Even after writing a 755 permission to it via sudo chmod!

But will give your suggestion a try and the zip...

Again thanks to you and Spooky!
Nick

Thanks xchs,
That worked and I have made it to number 3 on Spooky's list! no need to worry right now about mods to the .ini file!
The data base has appeared in phpMyAdmin! see screen grab.

1. Drop all tables from your current local database (which you created before). DONE
2. Import mysql-2.9.5.sql via phpMyAdmin to your local database. DONE
3. Run the Contao Install Tool again and execute all necessary upgrade procedures. DONE I THINK! But will hold off as ....
Got to here on the install and I get "The database is not up to date!" and a heap of files, all with the tl suffix! Clicking the update button does nothing!

So quick dumb questions - apologies! But do I crack on with 4 and log in to the back end of Contao or do I go to phpMyAdmin and start to implement 5 on Spooky's list?
In phpMyAdmin

4. After that you can start re-integrating all necessary extensions and files into the new Contao installation.
5. You will have to rename the /files folder to /tl_files

Again thank you both for your help.
Nick.

Attachment 135

Quote:

---

Originally Posted by Nick

Got to here on the install and I get "The database is not up to date!" and a heap of files, all with the tl suffix! Clicking the update button does nothing!

---

Nothing happens, because you did not activate any of these commands. However you should not do this anyway, because those commands will delete data from the database. Contao probably wants to delete those fields because the extensions are still missing. So for now, leave it as it is.


Did all other upgrade procedure run through? Something like "Contao 3.2 upgrade", "Contao 3.3 upgrade" , "…"

Hi Spooky,

Ref: -

Did all other upgrade procedure run through? Something like "Contao 3.2 upgrade", "Contao 3.3 upgrade" , "…"

Yes, all this happened, and I went through the process of clicking the various upgrades!

Not done anything since then as not sure whats next!

Thanks for all your help with this, must be very frustrating to deal with the newbies! But I seem to be close now.
I will save where I am with a system back up and start to look at re-integrating all necessary extensions and files into the new Contao installation
As a starting point I will do some research in the forums, but my first guess would be to check what has made it into phpmyadmin and what has not!

But in the meantime if you get a chance to help me with the next direction I would be very grateful. :-)

4. After that you can start re-integrating all necessary extensions and files into the new Contao installation.
5. You will have to rename the /files folder to /tl_files

Hello Spoooky,
I have done a bit of research now!
Have left the install stage alone as it says Contao is succesfully installed.
Logged into the Backend to check "Settings, Maintenance, or Extensions Manager" but they are all missing! Under system I only have File Manager and Restore!
See screen grab!

What have I done wrong!?

Thanks for any advice.

Attachment 136

This looks like the user "nick" does not have administrator rights.

Thanks for this Spooky - Yup that makes sense!
I have inherited this site and was given a user name and a password, but checking the localconfig.php file in the config folder of the site I can see that the dbUser and dbPass are different to the ones that I have! I will try to install using the ones in the ones in the config file. This may give me the rights needed!
Will keep you posted. Again thanks,
Nick

Hi, the database credentials don't matter for the back end login.

Please see this FAQ page for resetting the administrator password:

https://contao.org/en/frequently-ask...-password.html

After much ado! I seem to have found the administrator problem!

Even after I reset my user password in the tl_users set up, the Contao back end log in would let me in, but with no administrator rights! In fact with less than I had when I started! So I confirmed all the database user permissions in phpMyAdmin "Privileges"on me and yes all set up, all granted.
So back into edit me in the tl_users file in the data base and...

The site I have inherited had 4 tl_users set up! I was editing the user nick, but when I compared the settings with another user, they had a different set of Binary - do not edit (0 B) options checked. So I copied this user, changed the user name and password, saved the changes with GO.
Back to Contao back end log in, user name and password entered and I am in Contao with what I assume is full administrator privileges.
See attached.. Phew. xchs thank you! Now on with.... 4 and 5 On Spooky's list!

4. After that you can start re-integrating all necessary extensions and files into the new Contao installation. Starting with extensions manager!! Now I have it!

5. You will have to rename the /files folder to /tl_files

Again thanks chaps, you have been brilliant. Its turning into a long thread it may help the newcomers!
And I may .... expect to be back soon with more trouble..... Either way I will keep you posted, looking forward to using Contao....

Attachment 137!

Sorry... back again!
Bit too quickly for my liking but...

And thanks if you can check that I am doing the right thing!
Do not wish to cause any issues at this stage..
See attached screen grab.

I rebuilt the cache!

The extensions all seem to be Not approved for Contao 3.5.16, but some have a newer version available and one is Corrupted.
I started with only ajax and selected it, hit the green update button, new screen with a repair option, nothing happened! So back to extension manager and my next guess is to select ajax and hit install extension and then update database!
But better check with you chaps first as I may be very wrong!

Attachment 138

Hi, can you please show a screenshot of your /Sites/contao/system/modules directory?

xchs, Thanks for getting back to me on this, and for your kind help.

Attached is the screen shot of the modules directory, hope it helps. I have not run any updates on extensions yet!
Nick.

Attachment 139

xchs,
It occurred to me that you should also see the attached! May be irrelevant but in the site folder there is the site deardens.ltd.uk.
Within this folder is a Contao folder and a system folder. The screen shot route /Sites/deardens.ltd.uk/system/modules is attached for info.
A different module set appears!

Might not be relevant but just in case I am sending it through FYI.
Again many thanks.
Nick.


Attachment 140

Hi Nick, thanks. That confirms what I've suspected. Since you have installed a new "vanilla" Contao 3.5.16, all the extension from the Contao 2.9.5 installation are missing there. What you see in your Contao 3.5.16 back end are only the database references to the previously installed extensions from the old Contao 2.9.5 installation (see e.g. your screenshot here).

Therefore, the next steps would be:

• copy all extension folders from your /Sites/deardens.ltd.uk/system/modules/ directory to /Sites/contao/system/modules/ (attention: don't copy the backend, calendar, comments, faq, frontend, listing, news, newsletter, registration, rep_base, rep_client, rss_reader, tpl_editor since this core extensions are already there)
• switch to your Contao 3.5.16 back end, open the "Extension manager" back end module and update the extensions one by one (where possible)

Though repairing the extensions via the extension repository should suffice, should it not? That should be the safest way.

Quote:

---

Originally Posted by Nick

I started with only ajax and selected it, hit the green update button, new screen with a repair option, nothing happened! So back to extension manager and my next guess is to select ajax and hit install extension and then update database!

---

I doubt nothing happened. Is there an "ajax.php" in your Contao installation's root directory now? If yes, then the repair was successful. I recommend repairing and/or updating all the extensions.

Some of these extensions might not work in Contao 3 anymore. Some of those might even break your Contao installation.

Quote:

---

Originally Posted by Spooky

Though repairing the extensions via the extension repository should suffice, should it not?

---

Usually yes, that's right. I have not checked yet, but there could be some deprecated extensions that are no longer present in the ER.

Dear xchs and Spooky,
Attached screenshot showing Sites/Contao/ajax.php looks like this was created yesterday when I was testing extension installations.
However in the extensions manager window ajax still shows up as not approved for Contao 3.5.16. But if I select the install extension with ajax selected I get taken to the download update ajax version 1.1.16!
I have not followed this through yet! So still got Ajax 1.1.1

So do I crack on and copy all relevant extensions from Deardens.ltd Contao folder to Contao modules folder!
Or go back to the back end and continue one by one as per Ajax!? ... where possible noted!

Again gents thank so much for you professional help. Invaluable.
Nick.


Attachment 141
Attachment 142

Quote:

---

Originally Posted by Nick

However in the extensions manager window ajax still shows up as not approved for Contao 3.5.16.

---

That's normal. Many of those extensions are not maintained anymore. The [ajax] Extension for example is listed as compatible with Contao 2.9.0 to Contao 3.1.0 in its latest version. You have Contao 3.5.16 - that's why the Extension Repository marks it as "not approved for Contao 3.5.16".

Quote:

---

Originally Posted by Nick

But if I select the install extension with ajax selected I get taken to the download update ajax version 1.1.16!
I have not followed this through yet! So still got Ajax 1.1.1

---

It should be safe to update that extension. But as I said, even after updating, it will be listed as "not approved …".

Quote:

---

Originally Posted by Nick

So do I crack on and copy all relevant extensions from Deardens.ltd Contao folder to Contao modules folder!
Or go back to the back end and continue one by one as per Ajax!? ... where possible noted!

---

I recommend the latter.

Thanks again,
I will be working my way through this and will get back to the posting with an update at some point over the weekend.
Ajax compatibility noted, but I will update anyway.
I will work my way through one by one and if I hit trouble I will try the option of copying the problem module over.
More later and thanks - have a good weekend.
Nick.

Sorry for the delay in progress report!
Well it was going to plan re extensions install and update last Friday!

1. Ajax
2. backend_filterwiz
3. backend_filtertree
4. calender_tabletree

And then tried with 5. catalog and hit a glitch!
I use Chrome as a browser and as soon as I installed this one Chrome decided that it could no longer connect to http://localhost/~nickair/contao/contao/ or http://localhost/~nickair/contao/contao/install.php
Message Cannot connect to .....
I run half hourly back up's! And tried to step back an hour, Shut everything down and ran a restart!
But the Mac crashed and decided it could not find the system!
So I gave up and went to the pub! Leaving the battle for Monday!

Well back at it! Managed to restore the system and got back to where I was last Friday am
Contao back up and running but no extensions installed yet. I plan to get back to no 4 above and skip 5 until the very last extension module!
Then try to the copy catalog module from deardens.ltd Contao modules folder to the Sites Contao modules folder. There may be more trouble to come, but this is where I am!

Thanks again for your help,
Nick.

Again, all was going well I left out catalog and catalog_fieldshortener as they are both "beta" files but CD-DynamicTable tripped me up with the same issue as last time... screen grab attached for info. I will try a backwards step again and leave this out and perhaps try a copy!

Not sure if this is going to work out, but will give it a go !!

Nick



Attachment 143

Well I have tried the copy of files over to the Contao modules folder and all is well...
That is until I select one and try to update it! As soon as I do I get the same screen.
Tried all three browsers - Safari - Crome and Firefox no joy in any.

It seems that when I copy all the modules over into the Contao modules folder from the deardens.ltd.uk modules folder and then log into the back end all looks good!
But as soon as I try to update I get this screen..
Drat......

Attachment 144

Hi, you get an Internal Server Error (Error 500). You should check the error_log file what's causing this error. If you don't know the location of the error log file you can create a new PHP file "phpinfo.php" in the Contao root directory (i.e. /Sites/contao/) containing this PHP code:

PHP Code:

---

<?php phpinfo(); ?>

---

Run this PHP file by opening http://localhost/~nickair/contao/phpinfo.php and search for error_log.

Hi xchs,
And thanks again.

Unfortunately I do not know the location of the error_log so I have created a new new PHP file "phpinfo.php" in the Contao root directory (i.e. /Sites/contao/) containing this PHP code: <?php phpinfo(); ?> Screen grab attached to show that phpinfo.php has appeared next to index.php!

I can access the php file by http://localhost/~nickair/contao/phpinfo.php this works!
I have searched for error_log and one instance shows up, Local Value and Master Value both show as "no value. See screen grab.

Do I need to reset this setting to enable the reading of errors to help me track down what is causing the Internal Server Error (Error 500)? Thank you sooo much for your help.
Nick.



Attachment 145
Attachment 146

Just been checking on various blogs and sites and Apache2 could be the problem!

http://blog.greggant.com/posts/2015/...l-capitan.html

So I plan to give it a go with the following mods to the vhost file: -

<VirtualHost *:80>
DocumentRoot "/Users/nickair/Sites/contao"
ServerName localhost
ErrorLog "/private/var/log/apache2/site-error_log"
CustomLog "/private/var/log/apache2/site-access_log" common
<Directory "/Users/nickair/Sites">
AllowOverride All
Require all granted
</Directory>

Any thoughts on this one before I hit the buttons!

Did you found the Apache error log file, e.g. there: /var/log/apache2/error_log ?

Hi xchs,

Thanks again!
No I was just searching the web for possible causes!

I followed the advice re:

Quote:

---

xchs
Hi, you get an Internal Server Error (Error 500). You should check the error_log file what's causing this error. If you don't know the location of the error log file you can create a new PHP file "phpinfo.php" in the Contao root directory (i.e. /Sites/contao/) containing this PHP code:
PHP Code:
<?php phpinfo(); ?>
Run this PHP file by opening http://localhost/~nickair/contao/phpinfo.php and search for error_log.

---

I did this and all good but after searching http://localhost/~nickair/contao/phpinfo.php for the error_log only one instance of the log showed up, Local Value and Master Value both show as "no value". See screen grab. So I got a bit stuck and resorted to Google! And found the Apache reference, but have done nothing with it yet.
Thought I had best wait until I got some feedback on the phpinfo.php error_log! as per attached. As I am not sure where to look for error_logs

Thanks again xchs,
Nick

Quote:

---

Originally Posted by Nick

I did this and all good but after searching http://localhost/~nickair/contao/phpinfo.php for the error_log only one instance of the log showed up, Local Value and Master Value both show as "no value". See screen grab.

---

Yes, I had already seen that.

Quote:

---

Originally Posted by Nick

As I am not sure where to look for error_logs

---

Look here: /var/log/apache2/error_log

xchs - Sorry for being a dumbo!

OK found the error log, But have run a restore to last Friday on the hard disk to square 1 me, but this is the contents of that file!

Quote:

---

AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using ::1. Set the 'ServerName' directive globally to suppress this message
[Tue Sep 27 23:10:55.241819 2016] [mpm_prefork:notice] [pid 60] AH00163: Apache/2.4.18 (Unix) PHP/5.5.36 configured -- resuming normal operations
[Tue Sep 27 23:10:55.241868 2016] [core:notice] [pid 60] AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'
[Wed Sep 28 10:08:04.987532 2016] [mpm_prefork:notice] [pid 60] AH00169: caught SIGTERM, shutting down
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using ::1. Set the 'ServerName' directive globally to suppress this message
[Wed Sep 28 10:08:35.511100 2016] [mpm_prefork:notice] [pid 87] AH00163: Apache/2.4.18 (Unix) PHP/5.5.36 configured -- resuming normal operations
[Wed Sep 28 10:08:35.511153 2016] [core:notice] [pid 87] AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'

---

Okay, thanks. Can you please go to the Contao back end and try to run the extension update again where you previously got the Error 500 (Internal Server Error). After that, check the error_log again.

Hi xchs,

Walked my way back through this and made screen grabs as I went! Trying to be a clear as possible!
With a restore I was able to start afresh! And managed to log into the backend with no error 500!
Attachment 150

1. Copied all modules from Sites/Deardens.ltd.uk/system/modules/ to Sites/contao/system/modules/ as per screen grab No1 Copy-Over-Modules. Note red flags show the ones not to copy!

However just in case its important! There is 1 module in the Sites/Deardens.ltd.uk/system/modules/ that is not in the backend Contao Extensions manager list or the Sites/contao/system/modules/ ! Its called -
z_custombemodule, so left alone for now! Its the last one on the backend list!
Attachment 148

And there are four modules appearing in the backend extensions manager list that do not appear in the Sites/Deardens.ltd.uk/system/modules/ or the Sites/contao/system/modules/ Could not copy them as they wre not there to copy and could not get to update them as read on I went to error 500 before I got to them!
See screen grab no 2. Extensions-Update-No 1
Attachment 149

2. Logged into the backend selected the first extension to update = backend_filterwix and after selecting the update option It went straight to the Error 500.
So I went straight to /var/log/apache2/error_log and the file reads as per next screen grab. error_log-after-no-1
Attachment 151

3. So while I was in there I had a look at the access_log in case it can throw some light on things!
Attached access-log-after-No-1
Attachment 152

Sorry to bombard you with files but I thought it may help to get to the bottom of this one! Too much information perhaps but just in case it helps!
Again thanks for your continued patience with me and for persistence!
I hope the aforementioned helps!
Nick.

Seems like the error it's not being tracked by this error_log file in /var/log/apache2/. It could well be that it is logged somewhere else, like /private/var/log/apache2/site-error_log (see e.g. your post #56) if you have set a custom vhost configuration (or the like).

BTW: The module directory "z_custombemodule" belongs to the [custom_be_modules] extension. You can safely install this extension from the Extension catalog or from the Extension manager so that you have the extension reference listed in the back end as well.

Quote:

---

Originally Posted by xchs

BTW: The module directory "z_custombemodule" belongs to the [custom_be_modules] extension. You can safely install this extension from the Extension catalog or from the Extension manager so that you have the extension reference listed in the back end as well.

---

Install into Contao 3.5? I don't think so, and I am quite sure that all parts of the Catalog extension won't run, too.

Hi xchs, and thanks for the note Lucina,

I don't seem to have a /private/var/log/apache2/site-error_log!
Located here, but I do have /private/var/log/apache2/error_log!
The contents of this file appear to be the same as the last error log!

Attachment 153

I have not yet followed up on my post #56 but perhaps thats the next move!
My options seem to be: -
1. Keep at it trying to solve the integration of a 2.9.5 database with Contao 3.5.16 and find the errors, but there seems to be some doubt that this database will run in 3.5!
2. Revert back to the running version of Contao that I have stored as a back up! And accept the fact that the old Contao website is in the too hard box! Start again and build from scratch in 3.5.16!
3. Or should I consider installing the old version of Contao (Contao 2.9.5) !? Would this be more compatible?

Again thanks for any advice.
Nick.